Change #4494
| Category | None |
| Changed by | Filip Moc <lede@moc6.cz> |
| Changed at | Mon 23 Nov 2020 00:46:40 |
| Repository | https://git.openwrt.org/openwrt/openwrt.git |
| Branch | master |
| Revision | 0d65177658dfec9fe99bbad4e37cf44f0642d831 |
Comments
ramips: add support for TP-Link MR6400 v4 You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v4.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A Signed-off-by: Filip Moc <lede@moc6.cz>
Changed files
- target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v4.dts
- target/linux/ramips/image/mt76x8.mk
- target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
- target/linux/ramips/mt76x8/base-files/etc/board.d/02_network