Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder zynq/generic Build #518

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision4ff7bdfeebd4c974b74df74f779fc10891898f5d
Got Revision4ff7bdfeebd4c974b74df74f779fc10891898f5d
Changes6 changes

BuildSlave:

fsf-dock-16

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. dlfindbinpl downloading to findbin.pl ( 0 secs )
    1. - no logs -
  4. gcc property 'cc_command' set ( 0 secs )
    1. stdio
    2. property changes
  5. g++ property 'cxx_command' set ( 0 secs )
    1. stdio
    2. property changes
  6. setproperty property 'ccache_command' set ( 0 secs )
    1. stdio
    2. property changes
  7. dlexpiresh dlexpiresh skipped ( 0 secs )
    1. - no logs -
  8. expire Checking for build tree expiry skipped ( 0 secs )
    1. - no logs -
  9. dlcleanupsh dlcleanupsh skipped ( 0 secs )
    1. - no logs -
  10. cleanold Cleaning previous builds skipped ( 0 secs )
    1. - no logs -
  11. cleanup Cleaning work area skipped ( 0 secs )
    1. - no logs -
  12. tools/clean User-requested "make tools/clean" skipped ( 0 secs )
    1. - no logs -
  13. toolchain/clean User-requested "make toolchain/clean" skipped ( 0 secs )
    1. - no logs -
  14. target/linux/clean User-requested "make target/linux/clean" skipped ( 0 secs )
    1. - no logs -
  15. dirclean User-requested "make dirclean" skipped ( 0 secs )
    1. - no logs -
  16. distclean User-requested "make distclean" skipped ( 0 secs )
    1. - no logs -
  17. gitcheckout Ensure that Git HEAD is sane ( 0 secs )
    1. stdio
  18. gitclean update skipped ( 0 secs )
    1. - no logs -
  19. gitfresh update ( 13 secs )
    1. stdio
  20. fetchrefs Fetching Git remote refs ( 1 secs )
    1. stdio
  21. switchtag Checking out Git tag skipped ( 0 secs )
    1. - no logs -
  22. gitverify Ensure that Git HEAD is pointing to a branch or tag ( 0 secs )
    1. stdio
  23. rmtmp Remove tmp folder ( 0 secs )
    1. stdio
  24. rmfeedlinks Remove feed symlinks ( 0 secs )
    1. stdio
  25. ccachecc downloading to ccache_cc.sh ( 0 secs )
    1. - no logs -
  26. ccachecxx downloading to ccache_cxx.sh ( 0 secs )
    1. - no logs -
  27. updatefeeds Updating feeds ( 2 mins, 10 secs )
    1. stdio
  28. installfeeds Installing feeds ( 33 secs )
    1. stdio
  29. dlconfigseed downloading to .config ( 0 secs )
    1. - no logs -
  30. newconfig Seeding .config ( 0 secs )
    1. stdio
  31. delbin Removing output directory ( 0 secs )
    1. stdio
  32. defconfig Populating .config ( 29 secs )
    1. stdio
  33. checkarch Checking architecture ( 0 secs )
    1. stdio
  34. libc property 'libc' set ( 0 secs )
    1. stdio
    2. property changes
  35. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  36. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  37. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  38. dldir Preparing dl/ ( 0 secs )
    1. stdio
  39. dltar Building and installing GNU tar ( 1 mins, 45 secs )
    1. stdio
  40. dlrun Populating dl/ ( 34 secs )
    1. stdio
  41. cleanbase Cleaning base-files ( 17 secs )
    1. stdio
  42. tools Building and installing tools ( 4 mins, 32 secs )
    1. stdio
  43. toolchain Building and installing toolchain ( 10 mins, 55 secs )
    1. stdio
  44. kmods Building kmods ( 4 mins, 57 secs )
    1. stdio
  45. kernelversion property 'kernelversion' set ( 0 secs )
    1. stdio
    2. property changes
  46. pkgclean Cleaning up package build ( 16 secs )
    1. stdio
  47. pkgbuild Building packages ( 17 mins, 23 secs )
    1. stdio
  48. pkginstall Installing packages ( 27 secs )
    1. stdio
  49. pkgindex Indexing packages ( 24 secs )
    1. stdio
  50. stageroot property 'stageroot' set ( 3 secs )
    1. stdio
    2. property changes
  51. filesdir Creating file overlay directory ( 0 secs )
    1. stdio
  52. kmodconfig Embedding kmod repository configuration ( 0 secs )
    1. stdio
  53. images Building and installing images ( 4 mins, 23 secs )
    1. stdio
  54. buildinfo Generating config.buildinfo, version.buildinfo and feeds.buildinfo ( 21 secs )
    1. stdio
  55. json_overview_image_info Generate profiles.json in target folder ( 16 secs )
    1. stdio
  56. checksums Calculating checksums ( 18 secs )
    1. stdio
  57. kmoddir Creating kmod directory ( 0 secs )
    1. stdio
  58. kmodprepare Preparing kmod archive ( 0 secs )
    1. stdio
  59. kmodindex Indexing kmod archive ( 21 secs )
    1. stdio
  60. signprepare Ran ( 0 secs )
    1. stdio
  61. signpack Packing files to sign ( 0 secs )
    1. stdio
  62. upload uploading sign.tar.gz ( 2 secs )
    1. - no logs -
  63. signfiles Ran ( 2 secs )
    1. stdio
  64. dlsigntargz downloading to sign.tar.gz ( 2 secs )
    1. - no logs -
  65. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  66. dirprepare Preparing upload directory structure ( 0 secs )
    1. stdio
  67. linkprepare Preparing repository symlink skipped ( 0 secs )
    1. - no logs -
  68. kmoddirprepare Preparing kmod archive upload directory ( 0 secs )
    1. stdio
  69. dirupload Uploading directory structure ( 2 secs )
    1. stdio
  70. target-sha256sums Fetching remote sha256sums for target ( 2 secs )
    1. stdio
  71. dlsha2rsyncpl downloading to sha2rsync.pl ( 0 secs )
    1. - no logs -
  72. buildlist Building list of files to upload ( 0 secs )
    1. stdio
  73. dlrsync.sh downloading to rsync.sh ( 0 secs )
    1. - no logs -
  74. targetupload Uploading target files ( 11 mins, 9 secs )
    1. stdio
  75. targetprune Pruning target files ( 3 secs )
    1. stdio
  76. kmodupload Uploading kmod archive ( 13 secs )
    1. stdio
  77. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  78. sourceupload Uploading source archives ( 2 secs )
    1. stdio
  79. df Reporting disk usage ( 0 secs )
    1. stdio
  80. ccachestat Reporting ccache stats ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/zynq_generic slave
buildername zynq/generic Builder
buildnumber 518 Build
cc_command /usr/bin/gcc-6 SetPropertyFromCommand Step
ccache_command /usr/bin/ccache SetPropertyFromCommand Step
codebase Build
cxx_command /usr/bin/g++-6 SetPropertyFromCommand Step
dl_lock None BuildSlave
do_cleanup True BuildSlave
got_revision 4ff7bdfeebd4c974b74df74f779fc10891898f5d Git
kernelversion 5.4.71-1-7439955b90281e755f2065aa866c4921 SetPropertyFromCommand Step
libc SetPropertyFromCommand Step
max_builds 1 BuildSlave
nproc 8 SetPropertyFromCommand Step
project Build
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 4ff7bdfeebd4c974b74df74f779fc10891898f5d Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename fsf-dock-16 BuildSlave
stageroot /builder/shared-workdir/build/staging_dir/target-arm_cortex-a9+neon_musl_eabi/root-zynq SetPropertyFromCommand Step
ul_lock None BuildSlave
workdir /builder/zynq_generic slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Felix Fietkau
  2. 张鹏

Timing:

StartSat Oct 17 19:25:55 2020
EndSat Oct 17 20:28:42 2020
Elapsed1 hrs, 2 mins, 46 secs

All Changes:

:

  1. Change #4210

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 08a42ef057b0c1c31d66358f29376b939487c732

    Comments

    mac80211: fix memory leak on filtered powersave frames
    After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged
    packets for stations in powersave mode.
    To fix this, move the code handling those packets from __ieee80211_tx_status
    into ieee80211_tx_status_ext
    
    Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • package/kernel/mac80211/patches/subsys/333-mac80211-fix-memory-leak-on-filtered-powersave-frame.patch
  2. Change #4211

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 93f98b283553af9f354b396bc8bb91ca791cc566

    Comments

    kernel: remove obsolete non-upstream block2mtd patches
    Since block2mtd is not used for firmware images anymore, these patches
    are no longer needed
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • target/linux/generic/pending-4.19/440-block2mtd_init.patch
    • target/linux/generic/pending-4.19/441-block2mtd_probe.patch
    • target/linux/generic/pending-5.4/440-block2mtd_init.patch
    • target/linux/generic/pending-5.4/441-block2mtd_probe.patch
  3. Change #4212

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4a0688ed71532a3dd68907f5603177d970e4ec03

    Comments

    base-files: remove block2mtd checks from sysupgrade
    This hasn't been used in a long time
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • package/base-files/files/lib/upgrade/common.sh
    • target/linux/octeon/base-files/lib/upgrade/platform.sh
  4. Change #4213

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:17:59
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 27a7d071c0e0576eddeb641d1f68abe1b6205aee

    Comments

    ath79: add support for Qxwlan E750G v8
    Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334.
    
    Specification:
    
     - 560/450/225 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 2T2R 2.4G GHz (AR9344)
     - 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
     - 7x LED (6 driven by GPIO)
     - 1x button (reset)
     - 1x DC jack for main power input (9-48 V)
     - UART (J23) and LEDs (J2) headers on PCB
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts
    • target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  5. Change #4214

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:17:59
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 987d9028e12f37fcb3ca095efd6ffde6d7007469

    Comments

    ath79: add support for Qxwlan E558 v2
    Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
    
    Specification:
    
     - 720/600/200 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 2T2R 2.4 GHz (QCA9558)
     - 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
     - 4x miniPCIe slot (USB 2.0 bus only)
     - 1x microSIM slot
     - 5x LED (4 driven by GPIO)
     - 1x button (reset)
     - 1x 3-pos switch
     - 1x DC jack for main power input (9-48 V)
     - UART (JP5) and LEDs (J8) headers on PCB
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig, whitespace adjustments]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts
    • target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts
    • target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  6. Change #4215

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:18:00
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4ff7bdfeebd4c974b74df74f779fc10891898f5d

    Comments

    ath79: add support for Qxwlan E1700AC v2
    E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880.
    
    Specification:
    
     - 750/400/250 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 3T3R 2.4 GHz
     - 3T3R 5 GHz
     - 2 x 10/1000M Mbps Ethernet (RJ45)
     - 1 x MiniPCI-e
     - 1 x SIM (3G/4G)
     - 1 x USB 2.0 Port
     - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input
     - UART (J5) header on PCB (115200 8N1)
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig, whitespace fixes]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ath79/image/generic.mk