Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder mxs/generic Build #601

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revisionfa02225ee656c18b084988246a0ad83fb202c374
Got Revisionfa02225ee656c18b084988246a0ad83fb202c374
Changes17 changes

BuildSlave:

nomosphere-dock-03

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. dlfindbinpl downloading to findbin.pl ( 0 secs )
    1. - no logs -
  4. gcc property 'cc_command' set ( 0 secs )
    1. stdio
    2. property changes
  5. g++ property 'cxx_command' set ( 0 secs )
    1. stdio
    2. property changes
  6. setproperty property 'ccache_command' set ( 0 secs )
    1. stdio
    2. property changes
  7. dlexpiresh dlexpiresh skipped ( 0 secs )
    1. - no logs -
  8. expire Checking for build tree expiry skipped ( 0 secs )
    1. - no logs -
  9. dlcleanupsh dlcleanupsh skipped ( 0 secs )
    1. - no logs -
  10. cleanold Cleaning previous builds skipped ( 0 secs )
    1. - no logs -
  11. cleanup Cleaning work area skipped ( 0 secs )
    1. - no logs -
  12. tools/clean User-requested "make tools/clean" skipped ( 0 secs )
    1. - no logs -
  13. toolchain/clean User-requested "make toolchain/clean" skipped ( 0 secs )
    1. - no logs -
  14. target/linux/clean User-requested "make target/linux/clean" skipped ( 0 secs )
    1. - no logs -
  15. dirclean User-requested "make dirclean" skipped ( 0 secs )
    1. - no logs -
  16. distclean User-requested "make distclean" skipped ( 0 secs )
    1. - no logs -
  17. gitcheckout Ensure that Git HEAD is sane ( 0 secs )
    1. stdio
  18. gitclean update skipped ( 0 secs )
    1. - no logs -
  19. gitfresh update ( 5 secs )
    1. stdio
  20. fetchrefs Fetching Git remote refs ( 0 secs )
    1. stdio
  21. switchtag Checking out Git tag skipped ( 0 secs )
    1. - no logs -
  22. gitverify Ensure that Git HEAD is pointing to a branch or tag ( 0 secs )
    1. stdio
  23. rmtmp Remove tmp folder ( 0 secs )
    1. stdio
  24. rmfeedlinks Remove feed symlinks ( 0 secs )
    1. stdio
  25. ccachecc downloading to ccache_cc.sh ( 0 secs )
    1. - no logs -
  26. ccachecxx downloading to ccache_cxx.sh ( 0 secs )
    1. - no logs -
  27. updatefeeds Updating feeds ( 37 secs )
    1. stdio
  28. installfeeds Installing feeds ( 30 secs )
    1. stdio
  29. dlconfigseed downloading to .config ( 0 secs )
    1. - no logs -
  30. newconfig Seeding .config ( 0 secs )
    1. stdio
  31. delbin Removing output directory ( 0 secs )
    1. stdio
  32. defconfig Populating .config ( 33 secs )
    1. stdio
  33. checkarch Checking architecture ( 0 secs )
    1. stdio
  34. libc property 'libc' set ( 0 secs )
    1. stdio
    2. property changes
  35. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  36. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  37. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  38. dldir Preparing dl/ ( 0 secs )
    1. stdio
  39. dltar Building and installing GNU tar ( 1 mins, 17 secs )
    1. stdio
  40. dlrun Populating dl/ ( 32 secs )
    1. stdio
  41. cleanbase Cleaning base-files ( 14 secs )
    1. stdio
  42. tools Building and installing tools ( 5 mins, 40 secs )
    1. stdio
  43. toolchain Building and installing toolchain ( 13 mins, 24 secs )
    1. stdio
  44. kmods Building kmods ( 5 mins, 6 secs )
    1. stdio
  45. kernelversion property 'kernelversion' set ( 0 secs )
    1. stdio
    2. property changes
  46. pkgclean Cleaning up package build ( 18 secs )
    1. stdio
  47. pkgbuild Building packages ( 12 mins, 55 secs )
    1. stdio
  48. pkginstall Installing packages ( 14 secs )
    1. stdio
  49. pkgindex Indexing packages ( 20 secs )
    1. stdio
  50. images Building and installing images ( 4 mins, 55 secs )
    1. stdio
  51. buildinfo Generating config.buildinfo, version.buildinfo and feeds.buildinfo ( 30 secs )
    1. stdio
  52. json_overview_image_info Generate profiles.json in target folder ( 14 secs )
    1. stdio
  53. checksums Calculating checksums ( 18 secs )
    1. stdio
  54. kmoddir Creating kmod directory ( 0 secs )
    1. stdio
  55. kmodprepare Preparing kmod archive ( 0 secs )
    1. stdio
  56. kmodindex Indexing kmod archive ( 19 secs )
    1. stdio
  57. signprepare Ran ( 0 secs )
    1. stdio
  58. signpack Packing files to sign ( 0 secs )
    1. stdio
  59. upload uploading sign.tar.gz ( 0 secs )
    1. - no logs -
  60. signfiles Ran ( 2 secs )
    1. stdio
  61. dlsigntargz downloading to sign.tar.gz ( 0 secs )
    1. - no logs -
  62. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  63. dirprepare Preparing upload directory structure ( 0 secs )
    1. stdio
  64. linkprepare Preparing repository symlink skipped ( 0 secs )
    1. - no logs -
  65. kmoddirprepare Preparing kmod archive upload directory ( 0 secs )
    1. stdio
  66. dirupload Uploading directory structure ( 0 secs )
    1. stdio
  67. target-sha256sums Fetching remote sha256sums for target ( 0 secs )
    1. stdio
  68. dlsha2rsyncpl downloading to sha2rsync.pl ( 0 secs )
    1. - no logs -
  69. buildlist Building list of files to upload ( 0 secs )
    1. stdio
  70. dlrsync.sh downloading to rsync.sh ( 0 secs )
    1. - no logs -
  71. targetupload Uploading target files ( 7 secs )
    1. stdio
  72. targetprune Pruning target files ( 0 secs )
    1. stdio
  73. kmodupload Uploading kmod archive ( 0 secs )
    1. stdio
  74. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  75. sourceupload Uploading source archives ( 0 secs )
    1. stdio
  76. df Reporting disk usage ( 0 secs )
    1. stdio
  77. ccachestat Reporting ccache stats ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/mxs_generic slave
buildername mxs/generic Builder
buildnumber 601 Build
cc_command /usr/bin/gcc-6 SetPropertyFromCommand Step
ccache_command /usr/bin/ccache SetPropertyFromCommand Step
codebase Build
cxx_command /usr/bin/g++-6 SetPropertyFromCommand Step
dl_lock None BuildSlave
do_cleanup True BuildSlave
got_revision fa02225ee656c18b084988246a0ad83fb202c374 Git
kernelversion 5.4.87-1-5fb6e345ba670afa31167aa3f41fff53 SetPropertyFromCommand Step
libc SetPropertyFromCommand Step
max_builds 1 BuildSlave
nproc 8 SetPropertyFromCommand Step
project Build
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision fa02225ee656c18b084988246a0ad83fb202c374 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename nomosphere-dock-03 BuildSlave
ul_lock None BuildSlave
workdir /builder/mxs_generic slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Andy Walsh
  2. Daniel Golle
  3. David Bauer
  4. Etan Kissling
  5. Jan Alexander
  6. Leon M. George
  7. Marty Jones

Timing:

StartThu Jan 14 06:42:12 2021
EndThu Jan 14 07:30:39 2021
Elapsed48 mins, 27 secs

All Changes:

:

  1. Change #4976

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Thu 14 Jan 2021 00:03:34
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 04f4ea59163b0a03e3697e00a2beae5f431d4b7c

    Comments

    iw: enable HE PHY information for iw-tiny
    Currently PHY information obtained from "iw phy" lacks information about
    a PHYs HE capabilities when using the by default installed iw-tiny.
    
    As there are already 802.11ax supported devices, enabled printing this
    information for the by-default installed iw variant.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • package/network/utils/iw/Makefile
    • package/network/utils/iw/patches/200-reduce_size.patch
  2. Change #4977

    Category None
    Changed by Marty Jones <mj8263788ohnoyoudont@gmail.com>
    Changed at Thu 14 Jan 2021 00:03:41
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d567a24200fcc08c251d4ff801accdb5bf6519a1

    Comments

    uboot-rockchip: update to v2021.01
    Update the U-Boot to version v2021.01.
    
    Run-tested: FriendlyARM NanoPi R2S
                Radxa Rock Pi 4
                Pine64 RockPro64
    
    Signed-off-by: Marty Jones <mj8263788@gmail.com>
    [format commit message]
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • package/boot/uboot-rockchip/Makefile
    • package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch
    • package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
    • package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c
    • package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h
  3. Change #4978

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Thu 14 Jan 2021 00:03:48
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 3c20768bb981b636b97a7ed80b7834835fc36ca1

    Comments

    uboot-rockchip: update NanoPi R2S patches
    Update the NanoPi R2S to the latest version submitted
    upstream.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
    • package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c
    • package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h
  4. Change #4979

    Category None
    Changed by Jan Alexander <janohnoyoudont@nalx.net>
    Changed at Thu 14 Jan 2021 00:03:54
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4e46beb31342a2b02e32185e91806093f68a77be

    Comments

    ipq806x: add support for Ubiquiti UniFi AC HD
    Hardware
    --------
    
    SoC:   Qualcomm IPQ8064
    RAM:   512MB DDR3
    Flash: 256MB NAND (Micron MT29F2G08ABBEAH4)
           32MB SPI-NOR (Macronix MX25U25635F)
    WLAN:  Qualcomm Atheros QCA9994 4T4R b/g/n
           Qualcomm Atheros QCA9994 4T4R a/n/ac
    ETH:   eth0 - SECONDARY (Atheros AR8033)
           eth1 - MAIN (Atheros AR8033)
    USB:   USB-C
    LED:   Dome (white / blue)
    BTN:   Reset
    
    Installation
    ------------
    
    Copy the OpenWrt sysupgrade image to the /tmp directory of the device
    using scp. Default IP address is 192.168.1.20 and default username and
    password are "ubnt".
    
    SSH to the device and write the bootselect flag to ensure it is booting
    from the mtd partition the OpenWrt image will be written to. Verify the
    output device below matches mtd partition "bootselect" using /proc/mtd.
    
    > dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11
    
    Write the OpenWrt sysupgrade image to the mtd partition labeled
    "kernel0". Also verify the used partition device using /proc/mtd.
    
    > dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12
    
    Reboot the device.
    
    Back to stock
    -------------
    
    Use the TFTP recovery procedure with the Ubiquiti firmware image to
    restore the vendor firmware.
    
    Signed-off-by: Jan Alexander <jan@nalx.net>

    Changed files

    • package/boot/uboot-envtools/files/ipq806x
    • target/linux/ipq806x/base-files/etc/board.d/02_network
    • target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
    • target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
    • target/linux/ipq806x/image/Makefile
    • target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch
  5. Change #4980

    Category None
    Changed by Jan Alexander <janohnoyoudont@nalx.net>
    Changed at Thu 14 Jan 2021 00:04:02
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 6738b5e2ac80ec7bcaaa47edf20d9b479550ed8e

    Comments

    uboot-envtools: add support for Aruba AP-303 and AP-365
    Both devices use u-boot env variables to boot OpenWrt from its flash
    partition. Using u-boot envtools, it is possible to change the bootcmd
    back to the stock firmware partition directly from OpenWrt without
    attaching a serial cable or even physically accessing the device.
    
    Signed-off-by: Jan Alexander <jan@nalx.net>

    Changed files

    • package/boot/uboot-envtools/files/ipq40xx
    • target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
    • target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
    • target/linux/ipq40xx/image/Makefile
  6. Change #4981

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Thu 14 Jan 2021 00:05:48
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision af49ae7d233666c294353a3cfc3bdf6fec7419fc

    Comments

    zstd: fix package source
    It looks like GitHub changed the URL path for release tarballs, thus the
    download for the zstd package was always falling back to the OpenWrt
    sources mirror.
    
    Fix the GitHub URL for one which works. The file hash remains unchanged.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • tools/zstd/Makefile
  7. Change #4982

    Category None
    Changed by Andy Walsh <andy.walsh44+githubohnoyoudont@gmail.com>
    Changed at Thu 14 Jan 2021 00:23:16
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9afbf33b60a322d1d77fdaf50a4a33d82f2ba323

    Comments

    kernel: drop unneeded kernel version dependency
    The current master only supports kernel 5.4, and there is no reason
    to remove KERNEL_IO_URING for future kernels.
    
    Drop the unneeded dependency.
    
    Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
    [improve commit title/message]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • config/Config-kernel.in
  8. Change #4983

    Category None
    Changed by Etan Kissling <etan_kisslingohnoyoudont@apple.com>
    Changed at Thu 14 Jan 2021 00:52:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 39add246c1e18afc1fe026b5f359a3acf8082279

    Comments

    nf-conntrack: allow querying conntrack info in nfqueue
    This allows libnetfilter_queue to access connection tracking information
    by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is
    provided in the NFQA_CT attribute.
    CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between
    nf_queue and nf_conntrack_netlink. Without this option, trying to access
    connection tracking information results in "Operation not supported".
    
    Signed-off-by: Etan Kissling <etan_kissling@apple.com>

    Changed files

    • package/kernel/linux/modules/netfilter.mk
    • target/linux/generic/config-5.4
  9. Change #4984

    Category None
    Changed by Etan Kissling <etan_kisslingohnoyoudont@apple.com>
    Changed at Thu 14 Jan 2021 00:52:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 02abd99f89d98344d086d95b1ec1dfa9901351aa

    Comments

    mbedtls: add config option to compile with hkdf
    This adds a config option to allow compiling with HKDF algorithm support
    to support applications that require this feature.
    
    Signed-off-by: Etan Kissling <etan_kissling@apple.com>

    Changed files

    • package/libs/mbedtls/Makefile
  10. Change #4985

    Category None
    Changed by Etan Kissling <etan_kisslingohnoyoudont@apple.com>
    Changed at Thu 14 Jan 2021 00:52:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 7babb978ad9d7fc29acb1ff86afb1eb343af303a

    Comments

    hostapd: add multicast_to_unicast and per_sta_vif
    This allows configuration of multicast_to_unicast and per_sta_vif options.
    - multicast_to_unicast requests multicast-to-unicast conversion.
    - per_sta_vif assigns each station its own AP_VLAN interface.
    
    Signed-off-by: Etan Kissling <etan_kissling@apple.com>

    Changed files

    • package/network/services/hostapd/Makefile
    • package/network/services/hostapd/files/hostapd.sh
  11. Change #4986

    Category None
    Changed by Daniel Golle <danielohnoyoudont@makrotopia.org>
    Changed at Thu 14 Jan 2021 00:52:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 1e2d162092dd54fc7b285dd89014958786dc2b5a

    Comments

    hostapd: improve error handling when adding supplicant config
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>

    Changed files

    • package/network/services/hostapd/Makefile
    • package/network/services/hostapd/files/hostapd.sh
  12. Change #4987

    Category None
    Changed by Daniel Golle <danielohnoyoudont@makrotopia.org>
    Changed at Thu 14 Jan 2021 00:52:50
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d9d698843469ee24de01fbb498bd8690d69b8b61

    Comments

    mac80211: improve error handling when adding hostapd config
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>

    Changed files

    • package/kernel/mac80211/Makefile
    • package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
  13. Change #4988

    Category None
    Changed by Daniel Golle <danielohnoyoudont@makrotopia.org>
    Changed at Thu 14 Jan 2021 00:52:50
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 1f785383875ab0abdeda0c71907c2c95ef76cca6

    Comments

    hostapd: run as user 'network' if procd-ujail is installed
    Granting capabilities CAP_NET_ADMIN and CAP_NET_RAW allows running
    hostapd and wpa_supplicant without root priviledges.
    
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>

    Changed files

    • package/network/services/hostapd/Makefile
    • package/network/services/hostapd/files/wpad.init
    • package/network/services/hostapd/files/wpad.json
    • package/network/services/hostapd/files/wpad_acl.json
  14. Change #4989

    Category None
    Changed by Leon M. George <leonohnoyoudont@georgemail.eu>
    Changed at Thu 14 Jan 2021 02:45:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 3497b30b9c9699731590611f246dd744a231ccf9

    Comments

    hostapd: remove unused variable
    'enc_str' was never used.
    
    Fixes: 498d84fc4e00 ("netifd: add wireless configuration support
    and port mac80211 to the new framework")
    
    Signed-off-by: Leon M. George <leon@georgemail.eu>

    Changed files

    • package/network/services/hostapd/files/hostapd.sh
  15. Change #4990

    Category None
    Changed by Leon M. George <leonohnoyoudont@georgemail.eu>
    Changed at Thu 14 Jan 2021 02:48:41
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4bde00c2a3cdb97d0bf9ed35955cebc477e472f5

    Comments

    hostapd: remove unused variable
    'base' was never used.
    
    Fixes: 498d84fc4e00 ("netifd: add wireless configuration support
    and port mac80211 to the new framework")
    
    Signed-off-by: Leon M. George <leon@georgemail.eu>

    Changed files

    • package/network/services/hostapd/files/hostapd.sh
  16. Change #4991

    Category None
    Changed by Leon M. George <leonohnoyoudont@georgemail.eu>
    Changed at Thu 14 Jan 2021 02:50:38
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f72ce73e364d34f4235fcb02927523f9ce330175

    Comments

    hostapd: remove trailing whitespaces
    Signed-off-by: Leon M. George <leon@georgemail.eu>

    Changed files

    • package/network/services/hostapd/files/hostapd.sh
  17. Change #4992

    Category None
    Changed by Leon M. George <leonohnoyoudont@georgemail.eu>
    Changed at Thu 14 Jan 2021 02:54:06
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision fa02225ee656c18b084988246a0ad83fb202c374

    Comments

    hostapd: fix key_mgmt typo
    The key_mgmt variable was mistyped when checking against "WPS", so
    the if clause was never entered.
    
    Fixes: f5753aae233f ("hostapd: add support for WPS pushbutton station")
    
    Signed-off-by: Leon M. George <leon@georgemail.eu>
    [add commit message, bump PKG_RELEASE]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • package/network/services/hostapd/Makefile
    • package/network/services/hostapd/files/hostapd.sh